Alugear AERO Chainring - MTB | Direct Mount (SRAM 3-Bolt) | Boost | 1x 10/11/12s - round | black

Technologically solid, extremely light and unique in design. These properties characterize the chainrings from Alugear. And the MTB version of the AERO chainring for 1-speed cranks with SRAM 3-Bolt mount is no exception. Not only the wealth of experience of the Alugear engineers, but also extensive tests have contributed to a considerable weight reduction without having to make any significant compromises in terms of impact resistance. Both the optimized arm design and strategic machining of the CNC-milled aluminium chainring are responsible for this. Meanwhile, the Narrow/Wide tooth profile ensures smooth chain running by keeping the chain securely in position at all times. Visually, the chainring stands out with the AERO look typical of Alugear. To maintain this look for a long time, the chainring has an industrial hard anodization, which noticeably increases the protective effect against mechanical impacts. The unique tooth profile, specially designed for interaction with mountain bike chains, also contributes to increased wear resistance. In addition, it eliminates chain noise to ensure smooth operation of the entire system. Technical details of the Alugear AERO chainring range of use: MTB material: aluminium 7075-T6 (CNC-milled, hard anodized) interface: Direct Mount (SRAM 3-Bolt) tooth profile: Narrow/Wide offset: Boost, 3 mm (round/oval 32-36T) / 2,5 mm (round 38T) / 2 mm (oval 38T) ovality / timing: 12 % / 108° (top dead center) outer diameter (32 / 34 / 36 / 38 teeth): 138.6 / 148 / 154.2 / 161.3 mm (round; manufacturer's specification) 144 / 152 / 162 / 170 mm (oval; manufacturer's specification) weight (32 / 34 / 36 / 38 teeth): approx. 63 / 68 / 74 / 79 g (round; manufacturer's specification) approx. 59 / 65 / 72 / 78 g (oval; manufacturer's specification) Compatibility: 1-speed cranksets with SRAM 3-Bolt interface compatible with cranks for GXP, DUB and BB30 bottom bracket shells suitable for Cane Creek eeWings cranks chains from SRAM (Eagle, 12-/11-/10-speed) and Shimano (12-/11-/10-speed) For the best possible chain retention, the manufacturer recommends using a rear derailleur with a clutch system. Designed for frames with a rear installation width of 148 mm (Boost). Scope of supply: 1 chainring