r.s.p. Hot WAX Warmer for Chainwax

Hot WAX Warmer for Chainwax - 500 ml The Warmer is ideal for all types of chain waxes. It melts any type of wax, including wax beads and wax blocks. Details Capacity: 500 ml Voltage: 220-250V Frequency: 50/60 Hz Temperature range: 0-120°C Inner container made of aluminum Use Connect the device to the power supply. Remove the plastic cover from the warmer. Add wax from the can or wax drops to the warmer. Switch on the heater, set the temperature unit (°C or °F) and adjust the temperature until the wax melts. This process takes about 15 minutes. To speed it up, close the warmer with a lid. The higher the temperature of the wax, the faster it melts. Once the wax has melted, reduce the temperature, It is important to check the temperature of the wax before applying it and adjust if necessary. The wax must not be too hot or too cold. Continue treating the chain. After finishing the treatment, remove the wax can from the device, switch off the device and then cover it with the lid. If you clean the device with a special agent after disconnecting it from the power supply, when it is still slightly warm. Caution! The inner container and wax are hot after melting! Danger of burns!